- What are the two components of an IPv4 address?
- What are the 2 versions of IP address?
- What are the 4 parts of an IP address called?
- What are the five classes of IPv4 addresses?
- What is a 192.168 IP address?
- What is a 32 subnet?
- Can IP address reveal identity?
- Which of the following is a Class A IPv4 address?
- Which two IPv4 to IPv6 transition techniques manage the interconnection?
- What are the three parts of an IPv4 address?
- What are Class A IP addresses?
- What is IP address types?
What are the two components of an IPv4 address?
The bytes of the IPv4 address are further classified into two parts: the network part and the host part.
The following figure shows the component parts of a typical IPv4 address, 129.144.
What are the 2 versions of IP address?
There are two versions of IP that currently coexist in the global Internet: IP version 4 (IPv4) and IP version 6 (IPv6). IP addresses are made up of binary values and drive the routing of all data over the Internet. IPv4 addresses are 32 bits long, and IPv6 addresses 128 bits long.
What are the 4 parts of an IP address called?
For this purpose, an IP address is recognized as consisting of two parts: the network prefix in the high-order bits and the remaining bits called the rest field, host identifier, or interface identifier (IPv6), used for host numbering within a network.
What are the five classes of IPv4 addresses?
In the IPv4 IP address space, there are five classes: A, B, C, D and E. Each class has a specific range of IP addresses (and ultimately dictates the number of devices you can have on your network).
What is a 192.168 IP address?
192.168. 1.1 is a common factory IP address for a consumer-grade router. If the router is used for connecting to the Internet then all computers and devices which access the Internet through it will use this address as their default gateway.
What is a 32 subnet?
the /32 is the CIDR (shorthand) and refers to how many 1’s are in the subnet mask. For /32 that is 255.255.255.255 or 11111111.11111111.11111111.1111111. that means you can only have one ip address, on your network before needing a gateway/router to get outside that network. with /32 it’s just you.
Can IP address reveal identity?
He adds, “However, when combined with other information, such as a user name, then yes, the IP address can reveal your identity.” Scott Crawford, managing research director at Enterprise Management Associates, explains that an IP address identifies a host on a specific network or subnet.
Which of the following is a Class A IPv4 address?
IPv4 address classes: Class A IP addresses, where the 1st bit is 0, encompass the range of 0.0. 0.0 to 127.255. 255.255.
Which two IPv4 to IPv6 transition techniques manage the interconnection?
Dual stack allows IPv4 and IPv6 to coexist on the same network segment. Dual stack devices run both IPv4 and IPv6 protocol stacks simultaneously. Tunneling is a method of transporting an IPv6 packet over an IPv4 network. The IPv6 packet is encapsulated inside an IPv4 packet, similar to other types of data.
What are the three parts of an IPv4 address?
IPv4 Classful Addressing To provide flexibility in the number of addresses distributed to networks of different sizes, 4-octet (32-bit) IP addresses were originally divided into three different categories or classes: class A, class B, and class C.
What are Class A IP addresses?
The IP range 127. x.x.x is reserved for loopback IP addresses. The default subnet mask for Class A IP address is 255.0. 0.0 which implies that Class A addressing can have 126 networks (27-2) and 16777214 hosts (224-2). Class A IP address format is thus: 0NNNNNNN.HHHHHHHH.HHHHHHHH.HHHHHHHH.
What is IP address types?
An internet protocol (IP) address allows computers to send and receive information. There are four types of IP addresses: public, private, static, and dynamic. An IP address allows information to be sent and received by the correct parties, which means they can also be used to track down a user’s physical location.